Description
The Tecnifibre ATP Pro Contact Overgrip in white is a go-to choice for competitive and recreational tennis players who demand a tacky, long-lasting grip on their racket. White is the most widely used overgrip color on the professional circuit, and this Tecnifibre overgrip delivers the same wax resin technology trusted by ATP tour players in a clean, classic finish. The pack of 3 gives you enough supply to keep your racket handle fresh through weeks of regular play.
WHAT MAKES THE TECNIFIBRE ATP PRO CONTACT OVERGRIP STAND OUT?
Wax Resin Technology for Consistent Tackiness
Most overgrips rely on a thin polyurethane layer that feels tacky out of the pack but loses its grip within a session or two. The Tecnifibre Pro Contact Overgrip takes a different approach by layering a wax resin coating over the base material. This coating increases tackiness by 50% compared to traditional overgrips and holds that feel for significantly longer. The result is a grip surface that does not become slick or smooth after a few hours of hitting, which is a common frustration with cheaper alternatives.
5x Faster Moisture Absorption
Sweat management is one of the biggest factors in grip performance, especially during summer tennis in Indian cities like Delhi, Pune, Bangalore, and Ahmedabad where temperatures regularly cross 35°C. The Tecnifibre Pro Contact Overgrip absorbs moisture up to 5 times faster than a standard overgrip, pulling sweat away from your palm before it reaches the grip surface. This rapid absorption keeps the tacky feel intact even during the third set of a competitive match when your hands are at their sweatiest.
ON-COURT PERFORMANCE
Tacky Tennis Overgrip for Spin and Control Players
A secure grip directly impacts your ability to generate spin and maintain racket head control through the contact zone. The tacky tennis overgrip surface on the Pro Contact locks your hand in position, reducing the micro-adjustments your fingers make during a swing. This stability is especially noticeable on kick serves, heavy topspin forehands, and slice backhands where the racket face angle needs to stay precise. Players moving up from basic overgrips often report that their shot consistency improves simply because the racket stops shifting in their hand.
Tennis Racket Overgrip With the Right Thickness
At 0.6mm, this tennis racket overgrip sits in the sweet spot between too thin and too thick. Thinner overgrips below 0.5mm tend to wear out quickly and offer minimal cushion, while thicker options above 0.7mm can change your grip size noticeably and dull the feedback from the racket. The 0.6mm thickness on the Pro Contact gives you enough cushion to reduce vibration transfer to your hand without masking the feel of the ball on the string bed. This matters for touch shots like drop volleys and angled returns where you need to feel exactly how the ball leaves the racket face.
WHY WHITE IS THE MOST POPULAR COLOR CHOICE
White overgrips remain the top-selling color across every major tennis brand, and for practical reasons beyond appearance. A white overgrip lets you visually track wear and dirt buildup, so you know exactly when it is time for a replacement. It also reflects heat better than darker colors, which can be a minor but real advantage during outdoor sessions in direct sunlight. On the professional tour, the majority of players — including Tecnifibre’s own roster of sponsored athletes — use white overgrips as their default choice. The clean look pairs well with any racket color scheme and gives your setup a sharp, match-ready appearance.
PACK CONTENTS AND APPLICATION
The Tecnifibre ATP Pro Contact Overgrip white pack contains 3 individual overgrips, each with its own finishing tape. To apply, remove your existing overgrip and start wrapping the new one from the bottom of the handle with a slight overlap of 3-5mm between each layer. Keep even tension throughout the wrap to avoid air pockets or bunching. Trim any excess at the top and secure with the finishing tape. A properly applied overgrip should feel smooth and uniform across the entire handle length with no ridges or loose edges.
COMPATIBLE RACKETS AND SPORTS
This tennis racket overgrip is compatible with all standard tennis racket handles regardless of brand. Whether you play with a Tecnifibre T-Fight 305, Wilson Blade, Babolat Pure Drive, Head Speed, or Yonex EZONE, the Pro Contact wraps cleanly over any replacement grip. It also works well on badminton rackets and squash rackets for players who prefer a tacky feel across their racket sports equipment. The 0.6mm thickness adds minimal size change, so players with grip sizes between L1 and L4 can use it without significant alteration to their preferred handle circumference.
FREQUENTLY ASKED QUESTIONS
Q1. Why should I choose white over other colors?
Ans. White is the most popular overgrip color for a reason. It shows wear clearly so you know when to replace it, reflects heat during outdoor play, and maintains a clean professional appearance. The Tecnifibre ATP Pro Contact Overgrip in white delivers the same wax resin tackiness and 0.6mm thickness as the red and black variants — only the color is different.
Q2. How does the wax resin coating work?
Ans. The wax resin is a thin layer applied over the polyurethane base of the overgrip. It creates a sticky, tacky surface that grips your palm and fingers more effectively than a standard smooth overgrip. Tecnifibre’s wax resin formula increases tackiness by 50% compared to traditional overgrips, and this tacky feel lasts longer because the resin is embedded into the material rather than sitting on top as a temporary coating.
Q3. Will this overgrip change my grip size?
Ans. At 0.6mm thickness, the Tecnifibre Pro Contact Overgrip adds very little to your overall grip circumference. Most players will not notice a significant grip size change. If you are between grip sizes, adding this overgrip can bump you up slightly, which some players actually prefer for a more comfortable hold.
Q4. How often should I change this overgrip?
Ans. For regular players practicing 3-4 times per week, replacing the overgrip every 7-10 days is recommended. If you play in very hot or humid conditions, or if you sweat heavily, you may need to replace it more frequently. A good indicator is when the white surface starts turning grey or the tacky feel reduces noticeably.
Q5. Is the Tecnifibre ATP Pro Contact Overgrip the same as Pro Players?
Ans. No, these are two different overgrips from Tecnifibre. The Pro Contact uses wax resin for a tacky, sticky grip feel. The Pro Players uses hydrocell technology for fast sweat absorption and a dry feel. The Pro Contact is 0.6mm thick, while the Pro Players is 0.5mm. Choose Pro Contact if you want tackiness, and Pro Players if you want a dry, absorbent grip.
Q6. Can I use this overgrip for badminton?
Ans. Yes, the Tecnifibre ATP Pro Contact Overgrip works well on badminton rackets too. The tacky surface and 0.6mm thickness provide a secure hold for quick racket movements in badminton. Many players in India use the same overgrip across their tennis and badminton rackets for a consistent grip feel.
Reviews
There are no reviews yet.